You are here: Home » Custom Banners » Portable Displays » Wing
Wing
Flagmakers Wings stand over the rest at events, and are an eyecatching way to spread your message or reinforce your brand.
- Maxiumum impact for your design
- Lightweight and portable
- Elegant design with a wide flag area
- Available in 3 sizes (2.1m, 2.6m and 3.1m)
- Suitable for moderate weather conditions
- Easy to change flags
- Available with optional 1.5m extension pole for extra height
- Available with a choice of mounting options
Save $$$ with our flag and banner bundle deals below!
Quantity discounts apply
All prices exclude GST
Disclaimer
The product is only recommended for use as described in the ‘Uses’ section. It is not recommended for use outside these recommendations.
Flagmakers Ltd shall not be liable for any actions or consequences, legal or otherwise, arising from the use of the images or words. Images and words may have copyright or trademark protection and it is the client’s responsibility to determine the rights to use the images or words.
Product care
It is the owner’s responsibility to care for the product, i.e. keep it clean, occasionally lubricate spigots, keep dirt and grime out of moving parts.
Durability statement
Flag Life Datasheet. Please read about flag life in our separate datasheet “Flaglife’ which can be downloaded here.
The life of the product will be determined largely on where and how it is used. It is important to note that just one storm can damage a flag and or pole components.
Expected flag Life:
Flags and banners are made from fabric and therefore are subject to wear and tear. Although Flagmakers’ products are made from the highest quality fabrics available and use colour fast dyes, they are subject to often harsh UV, rain and wind conditions. Therefore a flag flying continuously is expected to show colour fade and some edge wearing after about 2 months under ‘normal’ weather conditions, i.e. no high winds, storms etc. The typical flag life will be between 3 to 6 months, if flying continuously, before requiring replacement.
Expected Hardware Life:
Hardware components are made from fibreglass, metal or plastic. The expected life of these components is approximately 2 years under ‘normal’ conditions of use. Normal conditions of use exclude excessive stress due to high wind loadings and continuous exposure to rain, sunlight and UV. All components will colour fade when exposed to UV and moisture, salt etc.
Wing
$163.90
Portable and lightweight
The Flexipole is fully portable and packs down into a neat carry bag for transportation and storage.
Fully reusable
The Flexipole is a one-off purchase and is designed to be reused with easily replaceable flags.
Versatile
The Flexipole display can be used on a number of mounting options, and on a flat surface it looks superb on our heavy duty roto moulded plastic Nova base.
Nova Base for Flexipole
Flagmakers designed moulded plastic freestanding base. Filled with sand or water it provides up to 30kg of stability. Includes wheels and handle for ease of portability. Available in a range of colours.$160.50
Norse Interior Base for Flexipole
An attractive 360mm diameter domed base, manufactured from zinc plated steel and powder coated black. Ideal for interior displays.$83.49
Norse Interior Base (weighted)
An attractive 360mm diameter domed base, manufactured from zinc plated steel and powder coated black. Ideal for interior displays.Weighted for extra stability.
$107.69
Ground Stake
Tap with a mallet to provide sturdy support in most ground conditions.$54.89
In-ground Mount
Poles can be easily displayed or removed from flat lawns, sealed areas etc. The mount can be pressed permanently into lawns or set in concrete, and as the top plate is flush with the surface of the ground, when not in use there is no restriction to pedestrians.$54.89
Fixed Angle Mount for Flexipole
These mounts are designed for securing to walls, fences, platforms or the ground. They allow the Flexipole to be easily displayed or removed as required. This option is angled at 30deg from the base plate.$54.89
Fixed Base Mount for Flexipole
These mounts are designed for securing to walls, fences, platforms or the ground. They allow the Flexipole to be easily displayed or removed as required. This option is angled at 90deg from the base plate.$54.89
Fixed Vertical Mount for Flexipole
These mounts are designed for securing to walls, fences, platforms or the ground. They allow the Flexipole to be easily displayed or removed as required. This option is parallel to the base plate.$54.89
U Base Mount
A lightweight galvanised steel base designed to push firmly around a vehicle’s tyre.$50.39
Vega Base
The NEW Flagmakers designed moulded plastic freestanding base. When filled with sand or water it provides up to 11kg for additional stability. This attractive little base is ideal for smaller exterior flexipole displays or for all indoor applications. Available in a range of colours.Size: 380mm x 380mm x 200mm
$75.90
Starting Price for Wing
Select your pole size and mounting option
Please contact us to enquire about this product or to make an order
Note: This price does not include the flag itself because flag price varies based on quantity ordered.
Prices exclude GST and freight. E&OE.
1.5m x 0.9m Wing flag, pole with Vega Base
2.1m x 0.9m display*art costs additional
1.5m x 0.9m Wing flag, pole with Nova Base
2.1m x 0.9m display*art costs additional
1.5m x 0.9m Wing flag, pole with Interior Base
2.1m x 0.9m display*art costs additional
1.8m x 0.9m Wing flag, pole with Vega Base
2.6m x 0.9m display*art costs additional
1.8m x 0.9m Wing flag, pole with Nova Base
2.6m x 0.9m display*art costs additional
1.8m x 0.9m Wing flag, pole with Ground Stake
2.6m x 0.9m display*art costs additional
2.7m x 0.9m Wing flag, pole with Vega Base
3.1m x 0.9m display*art costs additional
2.7m x 0.9m Wing flag, pole with Ground Stake
3.1m x 0.9m display*art costs additional
2.7m x 0.9m Wing flag, pole with Nova Base
3.1m x 0.9m display*art costs additional