Xtendapole Xp1

The Xtendapole is ideal for people on the run. It can be used with a variety of mounting options and packs down to fit easily into a car boot.

The Xtendapole’s superior quality aluminium construction is made and tested for New Zealand exterior conditions.

 

  • Robust aluminium tube construction.
  • Moulded plastic fixtures.
  • Proven over many years in demanding outdoor applications.
  • Heavy duty plastic lock nuts allow extension up to 3.2m.
  • Packs away into an optional carry bag approx 1.3m long.
  • Easily transportable.
  • Supplied with a foam buffer to prevent  damage to your vehicle.

Save $$$ with our flag and banner bundle deals below!

 

Quantity discounts apply

All prices exclude GST

Xtendapole Datasheet

Disclaimer

The product is only recommended for use as described in the ‘Uses’ section. It is not recommended for use outside these recommendations.

Flagmakers Ltd shall not be liable for any actions or consequences, legal or otherwise, arising from the use of the images or words. Images and words may have copyright or trademark protection and it is the client’s responsibility to determine the rights to use the images or words.

 

Product care

It is the owner’s responsibility to care for the product, i.e. keep it clean, occasionally lubricate spigots, keep dirt and grime out of moving parts.

Durability statement

Flag Life Datasheet. Please read about flag life in our separate datasheet “Flaglife’ which can be downloaded  here.

The life of the product will be determined largely on where and how it is used. It is important to note that just one storm can damage a flag and or pole components.

 

Expected flag Life:

Flags and banners are made from fabric and therefore are subject to wear and tear. Although Flagmakers’ products are made from the highest quality fabrics available and use colour fast dyes, they are subject to often harsh UV, rain and wind conditions. Therefore a flag flying continuously is expected to show colour fade and some edge wearing after about 2 months under ‘normal’ weather conditions, i.e. no high winds, storms etc. The typical flag life will be between 3 to 6 months, if flying continuously, before requiring replacement.

 

Expected Hardware Life:

Hardware components are made from fibreglass, metal or plastic. The expected life of these components is approximately 2 years under ‘normal’ conditions of use. Normal conditions of use exclude excessive stress due to high wind loadings and continuous exposure to rain, sunlight and UV. All components will colour fade when exposed to UV and moisture, salt etc.

 

Xtendapole Xp1

The Xtendapole is a 3 section telescopic portable flagpole. The pole is anodised aluminium and extends from approximately 1.2m up to 3.2m.  (Illustration shows pole retracted to 1.2m)

The Xtendapole is suitable for standard flags up to 1.8m x 0.9m, or used with the top swingarm for 1.8m x 0.85m vertical fabric flags.

$90.70

Made for New Zealand conditions

We use the best quality specialist fabrics, dyes and componentry available sourced from around the world to cope with New Zealand's harsh climatic conditions and high UV light levels. All flag fabrics are not equal. Flagmakers Polyknit and Polybunting fabrics are 100% polyester, a strong synthetic fibre which is highly resistant to UV degradation, is non absorbent, and dyes beautifully to give crisp, clear graphics and fade resistant colours.

Exclusive manufacturing methods

Only Flagmakers can offer numerous distinctively different methods for manufacturing flags and banners - each with its own characteristics, to suit your product and cost preferences. The majority of Flagmakers corporate flags are manufactured using a specialised dye screen printing process - to give a soft supple product of the highest quality, with excellent colour matching. This method is also the most economical when a number of flags are required.

Award Winning Quality

Flagmakers digital and dye screen printing has won many Pride in Print Awards for its quality.

Ground Stake

Tap with a mallet to provide sturdy support in most ground conditions.

$54.89

Nova Base

The Flagmakers designed moulded plastic freestanding base. When filled with sand or water it provides up to 30kg of stability, or alternatively can be pegged at the corners (pegs not included). Includes wheels and handle for ease of portability on flat surfaces. Available in a range of colours.

$160.49

U Base Mount

A lightweight galvanised steel base designed to push firmly around a vehicle’s tyre.

$50.39

Weighted Interior Base for Xtendapole

A top quality spun steel powder-coated black base for interior displays. Finished with black edge trim and turned aluminium spigot. Weighted for additional stability.

$115.39

Accessories

Carry Bag Budget Large

A nifty bag to carry pole, mounts and flag.  Keeps everything neat and tidy in your boot.  Available in two sizes, to accommodate your choice of accessories.

$51.70

Starting Price for Xtendapole Xp1

Select your pole size and mounting option

Price:


Please contact us to enquire about this product or to make an order

Note: This price does not include the flag itself because flag price varies based on quantity ordered.
Prices exclude GST and freight. E&OE.

Xtendapole 1.8m x 0.9m flag, pole with UBase Towbar Mount or Groundstake

Up to 3.2m x 0.9m display

*art costs additional

Contact us for more info or to order